Influence Exerted by Catalyst and Temperature of Condensation on the Release of Formaldehyd from Greaseproof Cotton Fabrics and Polyester/Cotton Mixed Fabrics

Authors

  • Drago Katović Institute of Textile and Clothing, Faculty of Technology of the University of Zagreb, Zagreb, Croatia, Yugoslavia
  • Ivo Soljačić Institute of Textile and Clothing, Faculty of Technology of the University of Zagreb, Zagreb, Croatia, Yugoslavia
  • Vidosava Šimić Institute of Textile and Clothing, Faculty of Technology of the University of Zagreb, Zagreb, Croatia, Yugoslavia

Abstract

The influence exerted by the temperature of condensation and by metal catalyst MgCL on the release of formaldehyd from the fabrics treated with DMEU, DMDHEU and etherified DMDHEU are investigated. The results obtained showed, that by the increase of the temperature of condensation or quantity of catalyst, the content of the free formaldehyd on the treated fabric decreases. The minimum quantity of catalyst, necessary for the achievement of the satisfactory effects is determined.

Downloads

Published

1989-03-31

How to Cite

[1]
Katović, D., Soljačić, I. and Šimić, V. 1989. Influence Exerted by Catalyst and Temperature of Condensation on the Release of Formaldehyd from Greaseproof Cotton Fabrics and Polyester/Cotton Mixed Fabrics. Tekstil. 38, 3 (Mar. 1989), 131–135.

Issue

Vol. 38 No. 3 (1989)

Section

Original scientific paper

License

Copyright (c) 1989 Hrvatski inženjerski savez tekstilaca

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.