Textile Material Joining and Cutting Machines with New Technologies - IMB 2006

Authors

  • Gojko Nikolić Faculty of Textile Technology University of Zagreb, Department of Clothing Technology, Zagreb, Croatia
  • Dubravko Rogale Faculty of Textile Technology University of Zagreb, Department of Clothing Technology, Zagreb, Croatia https://orcid.org/0000-0002-3104-8096
  • Darko Ujević Faculty of Textile Technology University of Zagreb, Department of Clothing Technology, Zagreb, Croatia
  • Snježana Firšt Rogale Faculty of Textile Technology University of Zagreb, Department of Clothing Technology, Zagreb, Croatia https://orcid.org/0000-0002-7409-5407

Keywords:

textile material cutting machines, textile material joining machines, ultrasonic, laser and waterjet technology, IMB fair

Abstract

The paper describes new machines and devices using new technologies such as ultrasonic and laser cutting and joining (welding), thermal joining, and waterjet cutting of textile materials. Although these are not new technologies, they are being increasingly developed, in particular for processing technical textile materials. This trend was especially emphasized at the IMB 2006 Fair in Cologne where the breakthrough of new machine types with these technologies was noticeable. One part of them comes from Asian countries.

Downloads

Published

2007-05-31

How to Cite

[1]
Nikolić, G., Rogale, D., Ujević, D. and Firšt Rogale, S. 2007. Textile Material Joining and Cutting Machines with New Technologies - IMB 2006. Tekstil. 56, 5 (May 2007), 308–317.

Issue

Vol. 56 No. 5 (2007)

Section

Professional paper

License

Copyright (c) 2007 Hrvatski inženjerski savez tekstilaca

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Most read articles by the same author(s)

<< < 5 6 7 8 9 10 11 12 13 14 > >>