Research on the optimization of technological procedures when using different systems of interphase transportation in the clothing industry

Authors

  • Ana Kunštek Faculty of Textile Technology University of Zagreb, Department of Clothing Technology, Zagreb, Croatia
  • Dubravko Rogale Faculty of Textile Technology University of Zagreb, Department of Clothing Technology, Zagreb, Croatia https://orcid.org/0000-0002-3104-8096
  • Ljiljana Trgovec Faculty of Textile Technology University of Zagreb, Department of Clothing Technology, Zagreb, Croatia

Abstract

Structures of the technological operation of sewing the bias trouser pocket with underlaying a pocket bag at the vorking place by the use of a conveyor for the assembly of trousers and by the use of a programmable conveyor trolley with Eton working places were performed and analysed. Norma! times of movement, technological methods and teclmological operations were determined by the method of predetermined times from the MTM-system. On this basis the optimization of technological operations was performed and their influence on the structure of technological operations examined whereby a more favourable structure obtained by the use of a programmable conveyor trolley with working places was found out.

Downloads

Published

1992-04-30

Issue

Vol. 41 No. 4 (1992)

Section

Original scientific paper

License

Copyright (c) 1992 Hrvatski inženjerski savez tekstilaca

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Kunštek, A. et al. 1992. Research on the optimization of technological procedures when using different systems of interphase transportation in the clothing industry. Tekstil. 41, 4 (Apr. 1992), 161–168.