Changes of Yarn Properties in the Process of Knitting

Authors

  • Zlatko Vrljičak Faculty of Textile Technology University of Zagreb, Department of Textile Mechanical Technology, Zagreb, Croatia
  • Miroslav Srdjak Faculty of Textile Technology University of Zagreb, Department of Textile Mechanical Technology, Zagreb, Croatia
  • Petar Perić Faculty of Textile Technology University of Zagreb, Department of Textile Mechanical Technology, Zagreb, Croatia
  • Željko Penava Faculty of Textile Technology University of Zagreb, Department of Textile Mechanical Technology, Zagreb, Croatia https://orcid.org/0000-0002-4097-6230

Abstract

The problems considering the projection of knitted goods and physical-mechanical properties of yarns are discussed. The influence exerted by static and dynamic stress and by friction coefficient of yarns on the changes of the basic properties of staple fibre yarns is described. With not waxed and waxed cotton yarns 50 tex the samples of plain weft knit goods were knitted on automatic hosiery knitting machine, gauge E 6. The main properties of yarn before and after knitting were determined. By means of F- and t-test the changes of the properties of yarns caused by winding and waxing, as well as the changes before and after knitting were tested.

Downloads

Published

1993-06-30

How to Cite

[1]
Vrljičak, Z., Srdjak, M., Perić, P. and Penava, Željko 1993. Changes of Yarn Properties in the Process of Knitting. Tekstil. 42, 6 (Jun. 1993), 319–325.

Issue

Vol. 42 No. 6 (1993)

Section

Original scientific paper

License

Copyright (c) 1993 Hrvatski inženjerski savez tekstilaca

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Most read articles by the same author(s)

1 2 3 4 5 6 7 8 9 10 > >>