Analysis of the Knitting Process by Means of a Knitting Machine Model

Authors

  • Miroslav Srdjak Institute of Textile and Clothing, Faculty of Technology of the University of Zagreb, Zagreb, Croatia, Yugoslavia
  • Igor Stupica FNT VTO Textile Technology, Ljubljana, Slovenia, Yugoslavia

Abstract

The authors give a report on the investigations of the influence exerted by machine and yarn properties on the tensions appearing in the yarn during the knitting process. For this purpose a model - a knitting machine simulator has been constructed. The measuring points, representing the needles and sinkers, were equiped by sensors. The results obtained helped to determine the influence of yarn feed, yarn count and cam angle on the thread tension in the knitting field.

Downloads

Published

1987-08-31

Issue

Vol. 36 No. 8 (1987)

Section

Original scientific paper

License

Copyright (c) 1987 Hrvatski inženjerski savez tekstilaca

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Srdjak, M. and Stupica, I. 1987. Analysis of the Knitting Process by Means of a Knitting Machine Model. Tekstil. 36, 8 (Aug. 1987), 415–420.