Utjecaj gustoće potke na neke parametre tkanine izrađene CAD-CAM sustavom tkanja

Stana Kovačević; Josip Hađina

The Impact of Weft Density on Some Fabric Parameters for Fabrics Using a CAD-CAM Weaving System

Authors

Stana Kovačević Faculty of Textile Technology University of Zagreb, Department of Textile Mechanical Technology, Zagreb, Croatia https://orcid.org/0000-0003-1466-3174
Josip Hađina Faculty of Textile Technology University of Zagreb, Department of Textile Mechanical Technology, Zagreb, Croatia

Abstract

Parameters of warp before and after sizing, as well as after weaving on an electronic jacquard loom with a CAD-CAM weaving system, are investigated. Fabrics with different patterns and various weft densities are woven using the same warp. Breaking strength and breaking elasticity of warp yarns before and after weaving with various weft densities are measured. The impact of changes in weft density on fabric compactness and quality, as well as on weaving machine utilisation is investigated. The results obtained indicate that weft density influences warp yarn deformations. Changes in weft density impact fabric compactness and quality, while machine utilisation remains unaltered.

Downloads

PDF (Hrvatski)

Published

2003-01-31

How to Cite

[1]

Kovačević, S. and Hađina, J. 2003. The Impact of Weft Density on Some Fabric Parameters for Fabrics Using a CAD-CAM Weaving System. Tekstil. 52, 1 (Jan. 2003), 18–23.